100% Urethane with Quick Cure Additive Available in Multiple Finishes

  • Protects surfaces from damage caused by graffiti
  • Clear high-gloss or matte finish will not yellow over time
  • Non-Sacrificial – remove graffiti without impacting protective layer
  • Cuts dry time in half* – Dry to the touch in 2 hrs and cure time 24 hrs

*Compared to VandlGuard Single-Part Urethane

VANDLGUARD® Material & Labor Warranty
5 Yr Warranty Apply 1 Coat
10 Yr Warranty Apply 2 Coats

Select sizes & view technical information below

Technical Data Sheet

More product information available below.

VandlGuard® Two-Part Urethane Kit is a low-gloss, water-based, Anti-Graffiti coating. Its strong clear film protects any exterior surfaces from graffiti and environmental damage. Use for applications that require a faster cure time. Comes with Quick Cure Additive, which also increases physical and chemical resistance and is ISO free. VandlGuard® Two-Part Urethane Kit is eligible for up to 10 years of material & labor warranty.

View Technical Documents

Highlights

  • Clean off graffiti as soon as 24 hours after initial application
  • Sustains repeated graffiti removals for up to 10 years
  • Dries with a clear low gloss finish that will not yellow
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – Apply with a sprayer, brush, or roller
  • Two component for faster dry time and increased durability
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – entire “System” can be completed in one day

Coverage Rates (Theoretical)

Surface Type Sq Ft / Gallon # Of Coats
Smooth 400 1-2
Rough/Porous 275-300 1-2

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard® Two-Part Urethane Kit.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Mix in Additive

Add 2 ounces of Urethane Quick Cure Performance Additive per Gallon of VandlGuard® Two-Part Urethane Kit. Mix well for 5-10 minutes.

3) Apply Product

Apply VandlGuard® Two-Part Urethane Kit with an airless sprayer, brush, or roller. If using an airless sprayer, cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 4 hours before applying additional coats. Product fully cures in 5-7 days.

4) Remove Graffiti

Within two days of graffiti incident, markings can be removed with a power wash. If more than 2 days have passed since the incident, VandlClean Super may be required. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


 

Technical Documents

VandlGuard® Two-Part Urethane

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS

Quick Cure Additive

TECHNICAL DATA SHEET (Urethane Additive TDS)  |  SAFETY DATA SHEET (Urethane Additive SDS)

General

LARR APPROVAL REPORT  | FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A

VandlGuard® Two-Part Urethane Kit is a low-gloss, water-based, Anti-Graffiti coating. Its strong clear film protects any exterior surfaces from graffiti and environmental damage. Use for applications that require a faster cure time. Comes with Quick Cure Additive, which also increases physical and chemical resistance and is ISO free. VandlGuard® Two-Part Urethane Kit is eligible for up to 10 years of material & labor warranty.

View Technical Documents

Highlights

  • Clean off graffiti as soon as 24 hours after initial application
  • Sustains repeated graffiti removals for up to 10 years
  • Dries with a clear low gloss finish that will not yellow
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – Apply with a sprayer, brush, or roller
  • Two component for faster dry time and increased durability
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – entire “System” can be completed in one day

Coverage Rates (Theoretical)

Surface Type Sq Ft / Gallon # Of Coats
Smooth 400 1-2
Rough/Porous 275-300 1-2

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard® Two-Part Urethane Kit.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Mix in Additive

Add 2 ounces of Urethane Quick Cure Performance Additive per Gallon of VandlGuard® Two-Part Urethane Kit. Mix well for 5-10 minutes.

3) Apply Product

Apply VandlGuard® Two-Part Urethane Kit with an airless sprayer, brush, or roller. If using an airless sprayer, cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 4 hours before applying additional coats. Product fully cures in 5-7 days.

4) Remove Graffiti

Within two days of graffiti incident, markings can be removed with a power wash. If more than 2 days have passed since the incident, VandlClean Super may be required. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


 

Technical Documents

VandlGuard® Two-Part Urethane

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS

Quick Cure Additive

TECHNICAL DATA SHEET (Urethane Additive TDS)  |  SAFETY DATA SHEET (Urethane Additive SDS)

General

LARR APPROVAL REPORT  | FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A

Highlights

Close Menu

Enquire Now

REQUEST SENT!

Thank you for enquiring. We will get back to you as soon as possible.