Non-Sacrificial Co-Polymer Blend with Up To 10 Year Material Warranty

  • Protects surfaces from damage caused by graffiti
  • Clear finish will not yellow over time
  • Non-Sacrificial – remove graffiti without impacting protective layer
  • Fast dry time and cure time

VANDLGUARD® Material Warranty
1 Yr Warranty Apply 1 Coat
5 Yr Warranty Apply 2 Coats
10 Yr Warranty Apply 3 Coats

Select sizes & view technical information below

Technical Data Sheet

More product information available below.

VandlGuard® Original Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. VandlGuard® can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® is eligible for a material warranty of up to 10 years.

View Technical Documents

Highlights

  • Sustains repeated graffiti removals for up to 10 years
  • Does not alter surface appearance or yellow over time
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – no mixing required
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – can be applied in one day

Coverage Rates (Theoretical)

1 Year
5 Years
10 Years

Substrate Sq Ft / Gallon # Of Coats Warranty
Precision/Split Face Block 200 1

2

3

1 Year

5 Years

10 Years

Ground Face Block 200 1

2

3

Scored/Fluted Block 180
Sand Blasted Block 180
Slump/Adobe Block 200
Heavy Textured Stucco 200
Brick 250
Unpainted Wood 200
Porous Tile 200
Fine/Medium Textured Stucco 250
Cast/Pre-Cast/Tilt-Up Concrete 250
Sand Blasted Concrete 225
Exposed Aggregate 225
EFIS 225
Metal 300
Painted Surfaces 300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard®.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Dilute (If Concentrate)

Mix 0.75 gallons of water with 32oz of product (1:3 Mix Ratio)

3) Apply Product

Apply VandlGuard® with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS  |  LARR APPROVAL REPORT  |  FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A

VandlGuard® Original Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. VandlGuard® can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® is eligible for a material warranty of up to 10 years.

View Technical Documents

Highlights

  • Sustains repeated graffiti removals for up to 10 years
  • Does not alter surface appearance or yellow over time
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – no mixing required
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – can be applied in one day

Coverage Rates (Theoretical)

1 Year
5 Years
10 Years

Substrate Sq Ft / Gallon # Of Coats Warranty
Precision/Split Face Block 200 1

2

3

1 Year

5 Years

10 Years

Ground Face Block 200 1

2

3

Scored/Fluted Block 180
Sand Blasted Block 180
Slump/Adobe Block 200
Heavy Textured Stucco 200
Brick 250
Unpainted Wood 200
Porous Tile 200
Fine/Medium Textured Stucco 250
Cast/Pre-Cast/Tilt-Up Concrete 250
Sand Blasted Concrete 225
Exposed Aggregate 225
EFIS 225
Metal 300
Painted Surfaces 300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard®.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Dilute (If Concentrate)

Mix 0.75 gallons of water with 32oz of product (1:3 Mix Ratio)

3) Apply Product

Apply VandlGuard® with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS  |  LARR APPROVAL REPORT  |  FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A

Highlights

Close Menu

Enquire Now

REQUEST SENT!

Thank you for enquiring. We will get back to you as soon as possible.