Non-Sacrificial Co-Polymer Blend with Up To One Year Material and Labor Warranty

  • Protects surfaces from damage caused by graffiti
  • Clear finish will not yellow over time
  • Non-Sacrificial – remove graffiti without impacting protective layer
  • Fast dry time and cure time

VANDLGUARD® ONE 1 Yr Material & Labor Warranty

Select sizes & view technical information below

Technical Data Sheet

More product information available below.

VandlGuard® One Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. The coating can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® One is eligible for a 1 year material & labor warranty.

View Technical Documents

Highlights

  • Sustains repeated graffiti removals for 1 year
  • Does not alter surface appearance or yellow over time
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – no mixing required
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – can be applied in one day

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon
Block 180-200
Stucco 200-250
Brick 250
Wood & Tile 200
Concrete 225-250
Exposed Aggregate & EFIS 225
Metal & Painted Surfaces 300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%. If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard® One.

3) Apply Product

Apply VandlGuard® One with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.

4) Remove Graffiti

Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS  |  LARR APPROVAL REPORT  |  FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Size 1 Gal, 5 Gal

VandlGuard® One Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. The coating can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® One is eligible for a 1 year material & labor warranty.

View Technical Documents

Highlights

  • Sustains repeated graffiti removals for 1 year
  • Does not alter surface appearance or yellow over time
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – no mixing required
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – can be applied in one day

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon
Block 180-200
Stucco 200-250
Brick 250
Wood & Tile 200
Concrete 225-250
Exposed Aggregate & EFIS 225
Metal & Painted Surfaces 300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%. If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard® One.

3) Apply Product

Apply VandlGuard® One with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.

4) Remove Graffiti

Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS  |  LARR APPROVAL REPORT  |  FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Size 1 Gal, 5 Gal

Highlights

Close Menu

Enquire Now

REQUEST SENT!

Thank you for enquiring. We will get back to you as soon as possible.