100% Urethane Available in High and Low Gloss

  • Seals horizontal / vertical porous surfaces
  • Non-yellowing high/low gloss finish
  • Single component – no mixing required
  • Fast dry time & cure time

CLEAR-SEAL™ 100% URETHANE 5 Yr Material Warranty

Select sizes & view technical information below

Technical Data Sheet

More product information available below.

Clear Seal™ 100% Urethane Single-Part is a single-part urethane coating that creates a protective film for painted and unpainted surfaces. This product creates a hard glossy film that is more UV resistant, stain resistant, and hot tire resistant than that of Clear-Seal™ acrylic urethane. It also protects against physical abrasion and spills. For a faster cure time use the Clear-Seal™ 100% Urethane Two-Part Kit, which also increases physical and chemical resistance.

View Technical Documents

Highlights

  • Impact and wear resistant
  • Single component – no mixing required
  • Gloss finish will not yellow or cloud
  • Easy application – no mixing required
  • Resistant to acids, bases, gasoline, alcohol & oil
  • May be applied at 50°F-90°F

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon # of Coats*
Porous Masonry 300-350 1-2
Dense Masonry 400 1-2
Painted Surfaces 300-350 1-2

*Please refer to the Technical Data Sheet below for full application guidelines. If you have further questions, please give us a call at (888) 765-7070 or email [email protected]

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Do not apply if relative humidity is greater than 80%.

2) Stir Product

Stir well for 5-10 minutes.

3) Apply Clear Seal™ 100%

Pour into paint tray. Using 3/4 inch nap roller, apply even coat to horizontal or vertical surface. For best results, apply solution in cross-hatch pattern. WARNING: Make sure surface has been completely dry for at least 48 hours prior to application. Before applying additional coats, make sure that the surface is dry to the touch.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A
Finish Low Gloss, High Gloss, Quick Cure

Clear Seal™ 100% Urethane Single-Part is a single-part urethane coating that creates a protective film for painted and unpainted surfaces. This product creates a hard glossy film that is more UV resistant, stain resistant, and hot tire resistant than that of Clear-Seal™ acrylic urethane. It also protects against physical abrasion and spills. For a faster cure time use the Clear-Seal™ 100% Urethane Two-Part Kit, which also increases physical and chemical resistance.

View Technical Documents

Highlights

  • Impact and wear resistant
  • Single component – no mixing required
  • Gloss finish will not yellow or cloud
  • Easy application – no mixing required
  • Resistant to acids, bases, gasoline, alcohol & oil
  • May be applied at 50°F-90°F

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon # of Coats*
Porous Masonry 300-350 1-2
Dense Masonry 400 1-2
Painted Surfaces 300-350 1-2

*Please refer to the Technical Data Sheet below for full application guidelines. If you have further questions, please give us a call at (888) 765-7070 or email [email protected]

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Do not apply if relative humidity is greater than 80%.

2) Stir Product

Stir well for 5-10 minutes.

3) Apply Clear Seal™ 100%

Pour into paint tray. Using 3/4 inch nap roller, apply even coat to horizontal or vertical surface. For best results, apply solution in cross-hatch pattern. WARNING: Make sure surface has been completely dry for at least 48 hours prior to application. Before applying additional coats, make sure that the surface is dry to the touch.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT) 

 


 

Additional information

Weight N/A
Dimensions N/A
Finish Low Gloss, High Gloss, Quick Cure

Highlights

Close Menu

Enquire Now

REQUEST SENT!

Thank you for enquiring. We will get back to you as soon as possible.